EMA · 乙烯-丙烯酸甲酯共聚物
询价 →
EMA 共聚物 · 37 个牌号现货
还在为 EVA 热封层 70°C 就软掉头疼？杜邦 EMA 系列耐热直接拉到 95-105°C，对 PET/PA/铝箔粘接力比 EVA 高 2-3 倍。共挤粘合层、热熔胶、铝塑复合，「耐热不够 + 粘接弱」两个老问题一次解决。金曼上海现货 30+ 吨，原厂授权，COA/TDS 当天发。24h 报价 👉 jinman-plastics.com.cn/ema
| 牌号 | 厂家 | MA 含量 | 主要应用 | 操作 |
|---|---|---|---|---|
| Lotryl 24MA02 France | Arkema | 24% | 挤出涂层粘合层复合层 | 详情 → |
| Lotryl 35MA05 France | Arkema | 35% | 热熔胶粘合剂涂层 | 详情 → |
| Optema TC110 USA | ExxonMobil | 25% | 挤出涂层层压铝箔粘合 | 详情 → |
| Optema TC120 USA | ExxonMobil | 20% | 挤出涂层层压共挤粘合 | 详情 → |
| Amplify EA100 USA | Dow | 25% | 粘合层共挤改性剂 | 详情 → |
| Lotryl 17MA01 France | Arkema | 17% | 低温热封薄膜涂层铝箔/纸塑复合粘合层厚涂挤出涂层（20-50 g/m²） | 详情 → |
| Lotryl 17MA04 France | Arkema | 17% | 通用挤出涂层纸塑/铝塑复合低温热封薄膜 | 详情 → |
| Lotryl 24MA05 France | Arkema | 24% | 铝箔/金属化膜挤出涂层多层共挤粘合层食品软包装复合 | 详情 → |
| Lotryl 28MA07 France | Arkema | 28% | 热熔胶基料（HMA）高粘性共挤粘合层铝箔/金属复合涂层 | 详情 → |
| Optema TC113 USA | ExxonMobil | 23% | 通用铝箔挤出涂层多层食品包装复合纸/塑淋膜 | 详情 → |
| Optema TC115 USA | ExxonMobil | 25% | 多层共挤食品包装高线速挤出涂层极性基材粘合层 | 详情 → |
| Optema TC130 USA | ExxonMobil | 30% | 高极性共挤粘合层铝箔/金属化膜挤出涂层热熔胶基料 | 详情 → |
| Amplify EA101 USA | Dow | 25% | 高速薄涂挤出涂层多层共挤粘合层（tieresin）色母/改性载体 | 详情 → |
| EMA TC 110 — | 行业典型 (Industry Typical, Optema TC 110 reference) | 24% | 挤出涂覆 (Blown/Cast)共挤粘合层热封层 | 详情 → |
| EMA TC 114 — | 行业典型 (Industry Typical, Optema TC 114 reference) | 24% | 挤出薄膜 (Blown/Cast)共挤粘合层热封层 | 详情 → |
| EMA TC 120 Molding — | 行业典型 (Industry Typical, Optema TC 120 Molding reference) | 25% | 注塑级挤出涂覆共挤粘合层 | 详情 → |
| EMA TC 220 — | 行业典型 (Industry Typical, Optema TC 220 reference) | 20% | 薄膜级共挤粘合层热封层 | 详情 → |
| AMPLIFY EA 100 — | 行业典型 (Industry Typical, Dow AMPLIFY EA 100 reference) | 20% | 挤出涂覆共挤粘合层热熔胶 | 详情 → |
| Lotader 5500 France | Arkema | 28 wt% (FTIR) | 铝箔复合黏合层软管复合PE/铝箔/PE 三层共挤 | 详情 → |
| Lotader 6700 France | Arkema | 28 wt% (FTIR) | PA/PE 复合相容剂PA/PP 复合相容剂多层共挤黏合层 | 详情 → |
| Lotader 3210 France | Arkema | 12 wt% (FTIR) | 食品包装低温热封PE/PE 热封层医药泡罩包装 | 详情 → |
| Lotader 8900 France | Arkema | 24 wt% (FTIR) | 高阻隔包装EVOH 黏合层PA 阻隔膜 | 详情 → |
| Tafmer A 0585 Japan | Mitsui | 8% | 软包装黏合PA/PE 共挤黏合层热熔胶 | 详情 → |
| Tafmer A 4085S Japan | Mitsui | 15% | 高透明涂层食品级涂层高光泽表面保护膜 | 详情 → |
| Lotader 3410 France | Arkema | 0% (实为 17% BA + 3.1% MAH) | 铝箔粘合金属化膜粘合纸塑淋膜 | 详情 → |
| Lotader 4603 France | Arkema | 26% | PET/EVOH/PE 多层膜 tie 层OPET/OPA/OPP 复合PVDC 涂层膜粘合 | 详情 → |
| Lotader 2000 France | Arkema | 估计 ~20% MA (按 Lotader 命名规则 2xxx = 通用基础段) | 通用挤出涂层通用共挤黏合层通用薄膜热封 | 详情 → |
| Lotader 2500 France | Arkema | 估计 ~25% MA (按 Lotader 命名规则 25xx = MA 25%) | 通用挤出涂层通用共挤黏合层通用薄膜热封 | 详情 → |
| Tafmer A 4070S Japan | Mitsui | 未公开 (按 Tafmer A 命名规则 40xx 估计 ~15-20% MA) | 高透明薄膜涂层软包装黏合层PA/PE 共挤黏合层 | 详情 → |
| Lotader AX 8900 France | Arkema | 24 wt% (FTIR) | PBT 抗冲改性 (注塑增强, 替代 PC/ABS)PET 抗冲改性 (CPET 托盘, 替代 PC)PPS 抗冲改性 (汽车电子连接器) | 详情 → |
| Lotader AX 8930 France | Arkema | 25 wt% (FTIR) | PET 抗冲改性 (CPET 托盘 + 食品级, 比 AX 8900 流动性好)PBT 抗冲改性 (高流动性, 薄壁注塑)PC/PBT + PC/PET 软质合金 (比 AX 8900 增韧效果更软) | 详情 → |
| Lotader AX 8920 France | Arkema | 25 wt% (FTIR) | PBT high-impact modification (high reactivity)PET high-impact (CPET tray + film)PC/PBT + PC/PET alloy compatibilizer (max GMA reactivity) | 详情 → |
| Lotader AX 8935 France | Arkema | 25 wt% (FTIR) | PBT mid-impactPET film high-flow extrusionAlloy compatibilizer (medium reactivity) | 详情 → |
| Optema TC140 USA | ExxonMobil | 30 wt% (FTIR) | Hot melt adhesive baseHigh adhesion coextrusion tie layerFood contact sealant layer | 详情 → |
| Lotader 2510 France | Arkema | 25 wt% (FTIR) | Extrusion coating (high speed)Aluminum foil laminationCoextrusion tie layer | 详情 → |
| Lotader 3500 France | Arkema | 32 wt% (FTIR) - high MA | Hot melt adhesive (high adhesion)Heat seal layerHigh MA tie layer | 详情 → |
| Lotryl 37BA50 France | Arkema | 37% (butyl acrylate, BA) | Hot melt adhesive base (low temp)Pressure sensitive adhesive (PSA)Heat seal layer (low temp) | 详情 → |
EMA 选型指南
MA 20-25%
中 MA 含量,通用挤出涂层 / 复合层
推荐 Optema TC120 / Lotryl 24MA02
MA 25-30%
高粘接,铝箔涂层 / 共挤粘合层首选
推荐 Optema TC110 / Amplify EA100
MA 30-35%
超高粘接,热熔胶 / 特种涂层
推荐 Lotryl 35MA05